Econetting Enterprises Private Limited
Econetting Enterprises Private Limited
Butibori, Nagpur, Maharashtra
SEND SMS
SEND EMAIL

Vacuum Degassed Steel Round Bars - VD Route Steel

During the steelmaking process, while the molten steel is still in the ladle and before it is poured, the steel must be degassed in order to: (1) reduce/eliminate dissolved gases, especially hydrogen and nitrogen; (2) reduce dissolved carbon (to improve ductility); and (3) to promote preferential oxidation of dissolved carbon (over chromium) when refining stainless steel grades.

In the steel smelting process, unwanted gases are dissolved in the liquid, which could produce any number of imperfections and defects. A common method used to remove these undesired gases is vacuum degassing. The process is done after the molten steel has left the furnace and before being poured into ingots or introduced into a continuous caster. This is done before rolling the final bars.

Vacuum degassing is practiced in the steel industry for several purposes. They are : -

  1. to remove hydrogen

  2. to improve cleanliness by removing part of the oxygen

  3. to produce steel of low carbon content ( < 0.03%)

  4. to produce steels to close chemical composition ranges (including deoxidizers), and

  5. to control pouring temperatures, especially for continuous casting operations.

EN8 / EN8D Round Bar - VD Route - 5mm to 210mm

EN8 / EN8D Round Bar - VD Route - 5mm to 210mm
  • EN8 / EN8D Round Bar - VD Route - 5mm to 210mm
Get Best Quote
Approx. Price: Rs 46,000 / Metric TonGet Latest Price

Product Details:

Minimum Order Quantity25 Metric Ton
ApplicationAutomobile Industry
MaterialEN8,EN8D,C45,Ck45,45C8,S45C,SAE1042,SAE1045,080M40,080A10,C40,Ck40,Cm40,Cm45
Size5mm to 210mm
Material GradeEN8 / EN8D
BrandIntegrated Steel Plant
ShapeRounds
StandardBS970 / IS / AISI / SAE
Surface TreatmentHot Rolled
TechniqueBF - EAF/BOF - LRF - VD - MEMS - CCM - BM
Suitable for machiningYes
Suitable for drawingYes
Bright BarsYes - offered against order
Suitable for forgingYes
Crack FreeYes
HardnessBelow 200 BHN
Billet RouteYes
Secondary RefiningYes - VD

We are offering EN8 / EN8D / C45 / Ck45 / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 round Bars from main steel producers. These steels undergo LRF and VD route processing before being rolled. Sizes offered are from 5mm to 210mm rounds in wire and bar form. The EN8 / EN8D wires & round bars which we offer to our customers are of very high quality and are made from Steel Billets which undergo rigurous testing. These round bars are used for making OEM Auto components, Textile Machinery, Machinery, Capital Equipment, Replacement Spares, etc. These VD Route steel products are made keeping in mind the quality requirements & parameters which have been set by the industry users and the market.

EN8 / EN8D / C45 / Ck45 / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 Steel Round Bars materials are always accompanied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers requirements. EN8 / EN8D / C45 / Ck45 / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 wire rods & round bar can be supplied in size ranging from 5mm to 210mm. EN8 Steel round bars are supplied by us to various industries. Our customers are placing repeat and regular orders without rejections and complaints.

In addition to EN8 / EN8D / C45 / Ck45 / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 Steel round bars Econetting Enterprises also offers MS, 070M20, SAE1010, SAE1008, SAE1015, SAE1018, EN32, IS2062 E250, IS2062 E350, EN8A, SAE1035, C35, 35C8, EN9, SAE4140, SAE4130, EN19, SAE 1541, SAE 1141, 16MnCr5, 20MnCr5, SAE8620, SUP9, SUP11, SAE 1012, SAE 1020, SAE 1030, A105, SAE 1010, LF2, EN24, SAE4340, EN31, SAE 52100, EN1A, EN1A(L), C15, C20, C25, C22, C30, SS 410, EN42 and can make other grades as per customer requirement.

We are supplying these EN8 / EN8D round bars to our customers in Nagpur, Hyderabad, Bhopal, Indore, Pune, Aurangabad, Mumbai, Bangalore, Raipur, Delhi, Ludhiana, Ahmedabad, Surat, Baroda, Rajkot, Surendranagar, Chennai, Jaipur, Ajmer, Gujarat, Maharashtra, Rajasthan, Madhya Pradesh, Andhtra Pradesh, Telangana, Chhatisgarh, Karnataka and other parts of India.

We can also offer wire in cut to length condition. Rounds are offered in straight lengths in 4 to 13 mtr lengths - as per order.
Request
Callback
Yes! I am Interested

C45 / Ck45 Round Bars - VD Route - 5 to 210mm

C45 / Ck45 Round Bars - VD Route - 5 to 210mm
  • C45 / Ck45 Round Bars - VD Route - 5 to 210mm
Get Best Quote
Approx. Price: Rs 46,000 / Metric TonGet Latest Price

Product Details:

Minimum Order Quantity25 Metric Ton
Material GradeC45,1C45,C46,C43,060A47,080A46,080M46,S45C,S48C
BrandRINL / SAIL / TATA / Mukand / Sunflag / Equivalent
Usage/ApplicationManufacturing
Single Piece Length3 meter,6 meter,12 meter
Test CertificateYes,with supplies
ApplicationAutomobile Industry
MaterialHot Rolled Steel Rounds
Size5mm to 210mm
ShapeRounds
FeaturesStraight Length
FinishBlack Bars
Third Party Inspection TipYes,subject to prior agreement
Thickness/Diameter0-1 inch,1-2 inch,2-3 inch,3-4 inch,>4 inch,Upto 8.5 inch
Surface TreatmentBlack Bar - Hot Rolled
TechniqueBF - EAF/BOF - LRF - VD - MEMS - CCM - BM

We are offering C45 / Ck45 / EN8 / EN8D / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 round Bars from main steel producers. These C45 and Ck45 steels undergo LRF and VD route processing before being rolled. Sizes offered are from 5mm to 210mm rounds in wire and bar form. The C45 and CK45 wires & round bars which we offer to our customers are of very high quality and are made from Steel Billets which undergo rigurous testing. These round bars are used for making OEM Auto components, Textile Machinery, Machinery, Capital Equipment, Replacement Spares, Railways, Aerospace applications, etc. These VD Route steel products are made keeping in mind the quality requirements & parameters which have been set by the industry users and the market.

C45 / Ck45 / EN8 / EN8D / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 Steel Round Bars materials are always accompanied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers requirements. C45 / Ck45 / EN8 / EN8D / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 wire rods & round bar can be supplied in size ranging from 5mm to 210mm. EN8 Steel round bars are supplied by us to various industries. Our customers are placing repeat and regular orders without rejections and complaints.

In addition to C45 / Ck45 / EN8 / EN8D / 45C8 / S45C / SAE1042 / SAE1045 / 080M40 / 080A10 Steel round bars Econetting Enterprises also offers MS, 070M20, SAE1010, SAE1008, SAE1015, SAE1018, EN32, IS2062 E250, IS2062 E350, EN8A, SAE1035, C35, 35C8, EN9, SAE4140, SAE4130, EN19, SAE 1541, SAE 1141, 16MnCr5, 20MnCr5, SAE8620, SUP9, SUP11, SAE 1012, SAE 1020, SAE 1030, A105, SAE 1010, LF2, EN24, SAE4340, EN31, SAE 52100, EN1A, EN1A(L), C15, C20, C25, C22, C30, SS 410, EN42, Stainless Steels and can make other grades as per customer demands.

We are supplying these C45 & CK45 round bars to our customers in Nagpur, Hingna, Hyderabad, Bhopal, Indore, Pune, Aurangabad, Mumbai, Bangalore, Raipur, Delhi, Ludhiana, Ahmedabad, Surat, Baroda, Rajkot, Surendranagar, Chennai, Jaipur, Ajmer, Gujarat, Maharashtra, Rajasthan, Madhya Pradesh, Andhtra Pradesh, Telangana, Chhatisgarh, Karnataka and other parts of India.

We can also offer wire in cut to length condition. Rounds are offered in straight lengths in 1 to 13 mtr lengths - as per order.
Request
Callback
Yes! I am Interested

20MnCr5 Case Hardening Steel

20MnCr5 Case Hardening Steel
  • 20MnCr5 Case Hardening Steel
Get Best Quote
Approx. Price: Rs 49,010 / TonGet Latest Price

Product Details:

Minimum Order Quantity25 Ton
Single Piece Length6 meter
MaterialCase Hardening Steel Round Bars
ShapeRound
Material Grade20MnCr5
Size5mm to 210mm
TechniqueHot Rolled
ApplicationManufacturing
Thickness/Diameter0-1 inch, 3-4 inch, 1-2 inch, Upto 210mm, 2-3 inch, >4 inch
BrandSunflag / Mukand / Musco / Sanyo / equivalent
FeaturesHot Rolled
Usage/ApplicationGeras,Pinions,Shafts,Rotors,Splines,Bushes,Pins
AnodizedNo
ColorBlack
Packaging TypeLoose / Bundled
Process MethodBillet
Surface FinishHot Rolled Black Bars
Surface TreatmentAs Rolled
Tensile StrengthGood
Test CertificateYes,with supplies
Third Party Inspection TpiYes,subject to prior agreement

20MnCr5 is a case-hardening steel with low carbon content but good hardenability reaching good wear resistance due to high surface hardness after hardening. The small grain size benefits in good ductility and fatigue strength. Suitable for gearboxes and axle gears.

20MnCr5 is an alloy steel, carburized steel, high strength and toughness, good hardenability. The resulting performance after heat treatment is better than 20Cr. Quenching small deformation, good low temperature toughness, machinability better; but the welding performance is low.

Generally used in the carburizing quenching or quenching. For the manufacture and re-load of large parts of quenched and tempered parts and small cross-section carburized parts, but also for the manufacture of medium-load, the impact of smaller small parts, instead of 20CrNi use, such as gears, shafts, spindles, , Worm, governor sleeve and so on.

chemical composition:

Carbon C: 0.17 ~ 0.22
Silicon Si: ≤0.25
Manganese Mn: 1.10 to 1.50
Sulfur: 0.010 ~ 0.035
Phosphorus P: ≤0.035
Cr: 1.00 ~ 1.30

Mechanical properties:

Tensile strength σb (MPa): 1482

Conditional yield strength σ0.2 (MPa): 1232

Elongation δ5 (%): 13

Section shrinkage ψ (%): 57

Impact toughness value αku (J / cm²): 73

Hardness: 357HB

Heat treatment and microstructure specifications:
Heat treatment specifications: 900 ℃ oil quenching + 870 ℃ oil quenching, tempering at 200 ℃.
Metallography: tempered martensite.

● use:
Manufacture of shafts and connecting rods under high-speed and high-bending load operating conditions, gearwheel mercury without strong impact load, water mercury-mercury rotor, clutches, bolts for pressure vessel cover plates, and the like.

 

Request
Callback
Yes! I am Interested

AISI12L14 Free Cutting Steel Round

AISI12L14 Free Cutting Steel Round
  • AISI12L14 Free Cutting Steel Round
  • AISI12L14 Free Cutting Steel Round
Get Best Quote
Approx. Price: Rs 53,010 / TonGet Latest Price

Product Details:

Minimum Order Quantity25 Ton
ApplicationAutomobile Industry
Single Piece Length3 meter, 6 meter
Material GradeSAE12L14 , SAE12L13, SAE12L15, EN1A Leaded, 230M07 Pb, 11SMnPb30, 9SMnPb28, SUM22L
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
BrandSunflag / Tata / SAIL / RINL / USHA / Similar
Available Diameter Mm5mm to 65mm
SizeDia 5mm to 65mm
StandardSAE / AISI / BS / IS

CHARACTERISTICS12L14 –12L14 bar is a standard resulfurized and rephosphorized grade carbon Steel, and a free machining steel. The added lead to the chemical composition provides improved machinability. Although the machinability is very good, the added lead content reduces the overall strength of this alloy.
APPLICATIONSTypical applications include high-speed screw machine products, spindles, bushings, hose fittings and many other items where excellent machining characteristics can be fully utilized.
SIZESDiameter: 5mm thru 100mm

Carbon is the primary alloying element present in the carbon steels. They contain 0.4% silicon and 1.2% manganese. Small quantities of molybdenum, chromium, nickel, aluminium, and copper are also present in these steels. AISI 12L14 carbon steel is known as the fastest machining bar product.

CHEMICAL COMPOSITION
Iron, Fe 97.91 - 98.7Manganese, Mn 0.85 - 1.15Sulfur, S 0.260 - 0.35Lead, Pb 0.15 - 0.35Carbon, C 0.15Phosphorous, P 0.040 - 0.090

The machinability rating of AISI 12L14 carbon steel is 190. It can be machined by dispersing lead particles all over the steel.

MECHANICAL PROPERTIESTensile Strength 78 ksi
Yield Strength 60 ksi
Elongation in 2" 10%
Reduction of Area 35%
Brinnell Hardness 163

AISI 12L14 Leaded, also known as 230M07 Pb/EN1A Pb. A low carbon mild steel with added lead. Properties: free cutting, suitable for machining using both automatic and CNC machines. Available in square, round, flat or hexagon form.
Request
Callback
Yes! I am Interested

EN1A, 11SMn37, AISI1215, 9SMn28, 9SMn36, SUM 25, SUM 22 Free Cutting Steel

EN1A, 11SMn37, AISI1215, 9SMn28, 9SMn36, SUM 25, SUM 22 Free Cutting Steel
  • EN1A, 11SMn37, AISI1215, 9SMn28, 9SMn36, SUM 25, SUM 22 Free Cutting Steel
Get Best Quote
Approx. Price: Rs 51,010 / TonGet Latest Price

Product Details:

Minimum Order Quantity25 Ton
Material GradeEN1A,11SMn37,AISI1215,9SMn28,9SMn36,SUM 25,SUM 22 Free Cutting Steel
BrandRINL,SAIL,TATA,similar
Usage/ApplicationMachining,Auto Parts
TypeStraight Lengths
ShapeRound,Square,Flat,Hexagon
Size5mm to 65mm
Surface FinishBlack Bars
ColorBlack
Single Piece Length3 meter
ApplicationManufacturing
Unit Length6 m, 3 m
Thickness/Diameter1-2 inch, 0-1 inch, 2-3 inch
MaterialFree Cutting Steel Bars
Delivery Details13- 15 days
FeaturesWires,Straight Lengths
AnodizedNo
Packaging TypeLoose
Process MethodBillet Rolled
StandardAISI,SAE,BS970,IS,JIS
Surface TreatmentNone
TechniqueHot Rolled
ToleranceAs per standard
Test CertificateYes,with supplies
Third Party Inspection TpiYes,subject to agreement

SAE1215 / EN1A Fast cutting steel is considered the standard screw stock. Cutting speeds and machining characteristics are excellent. SAE1215 / EN1A is a resulphurized and rephosphorized free machining steel, commonly referred to as screw machine stock. SAE1215 / EN1A is an improved free machining steel that has replaced the Bessemer B1113 grade years ago. SAE1215 / EN1A is especially suited for automatic screw machine operations where the major requirement is exceptional free-machining quality with a smooth, bright finish.
AISI 1215 / EN1A is a Standard Resulfurized And Rephosphorized grade Carbon Steel. It is composed of (in weight percentage) 0.09%(max) Carbon (C), 0.75-1.05% Manganese (Mn), 0.04-0.09% Phosphorus (P), 0.26-0.35% Sulfur (S), and the base metal Iron (Fe). Other designations of AISI 1215 carbon steel include UNS G12150 and AISI 1215.
SAE1215 / EN1A was developed for manufacturing numerous parts requiring considerable machining, close finish tolerances, and a bright smooth finish, ideal for screw machine stock. Can also be used for bushings, inserts, hydraulic hose fittings, couplings, studs, pins, etc. Beyond ordinary machining, it will respond well to roll threading, nibbing, and some minor bending without cracking. It is not recommended for forming, ordinary bending, or upsetting, nor for parts subject to severe fatigue stress.
Machineability and Weldability Machinability is rated at 136% of B1112. Average cutting speed 225 ft/min. Because of SAE1215 / EN1A has very high sulphur content, weldability is considered poor.
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Ankush Agrawal (Managing Director)
B-139, MIDC
Butibori, Nagpur- 441122, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS